Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterSimonton Sliding & Patio Doors: The Palmetto Bay Owner’s Guide
We stock and install Simonton-compatible sliding and patio door parts throughout Palmetto Bay, with most roller, handle, and lock replacements completed in a single visit. Installed pricing for the most common Simonton slider repairs runs $195 to $485 depending on the part and your door’s series. Most times, the first sign is a door that suddenly drags against the track, a handle that flops loose, or a latch that no longer catches the strike plate at night.
If you have a Simonton door that is getting harder to slide or no longer locks, you don’t need a full door replacement. You need the right part, matched to your series, installed by someone who knows why that part failed in South Florida humidity in the first place. That’s what we do. Call (386) 200-9224 and we’ll help you identify the part by the sticker and the measurements, not by guesswork.
Which Simonton Models This Applies To
Simonton makes several slider and patio door lines that show up regularly in Palmetto Bay homes: the 6100 and 6200 series (vinyl, common in 1990s and early 2000s construction), the 6500 series (a narrower profile often found in older condos and townhomes), and the Simonton StormBreaker line for impact-rated openings. The part fit is not universal, and that’s where we see most ordering mistakes. A roller assembly from a 6100 will not seat properly in a 6500 track. The width, the height, the wheel diameter, and the bracket hole pattern all differ between series.
The reliable way to identify your part is the sticker on the door’s top rail or the inside edge of the jamb. It lists the series number, the date code, and sometimes the glass package. If the sticker is gone or faded, we measure the wheel diameter, the assembly’s width, and the frame’s extrusion profile. On the OEM versus aftermarket question for Simonton: for rollers and handles, we install OEM Simonton parts whenever the series is still supported. For older 6100 doors where Simonton no longer carries certain internal hardware, we use matched aftermarket assemblies that meet the same dimension and load specs. We’ll show you exactly what we’re ordering, and we will not install a part that does not match the extrusion.
Signs Your Simonton Sliding & Patio Doors Is Failing
- The door drags or grinds on the track. The roller wheels have worn flat on one side, or the bearings are shot. In Palmetto Bay, salt air and fine sand accelerate this. Once the wheel won’t turn, the assembly starts scoring the aluminum track.
- You have to lift the door to get it to move. The rollers have dropped out of adjustment or the assembly has collapsed. Continued forcing bends the track, and suddenly you’re replacing track, not just rollers.
- The handle flops or spins without engaging. This is the internal lock linkage or the mortise latch. On Simonton sliders, the handle setscrew also tends to loosen over time, giving the impression of a broken mechanism when it’s actually a five-minute fix.
- The door no longer locks. The latch hook is either bent, worn, or out of alignment with the strike plate. Sometimes the frame has settled enough that the plate needs repositioning, not just a new latch.
- You see visible rust or corroded hardware at the bottom corners. This is where water sits. In Florida, weep holes clog, water backs up, and the roller housings corrode from the inside. The door may look fine from the top, but the hardware below is done.
Replacement Cost & What’s Included
For Simonton sliders in Palmetto Bay, here’s the range we quote most often, installed:
- Roller assembly replacement (per panel): $195 to $285, including both rollers, cleaning the track, and adjusting the door to ride level.
- Handle and latch set replacement: $165 to $260, depending on whether you need the exterior handle, interior handle, or the full mortise linkage.
- Track repair or replacement: $240 to $485, which includes pulling the panel, installing new track, and re-hanging the door.
- Full hardware refresh (rollers, handle, latch, weatherstripping): $380 to $540 for a standard two-panel slider.
What drives the range is your door’s series, whether the track is salvageable, and whether your frame has water damage that needs attention before new hardware goes in. Every quote is line-item and written before work begins, with no surprise charges on the bill. The parts carry the manufacturer’s stated warranty, and our workmanship is covered by our Done Right Promise with both warranty layers registered in writing before our truck leaves your driveway.
DIY or Call Us?
A sliding patio door panel is heavy. Two-panel Simonton units in impact glass can weigh over 200 pounds, and once the rollers fail, maneuvering that panel out of the track without damage or injury is not a weekend project. We tell our Palmetto Bay customers the truth: you can safely inspect the track for debris, check the sticker to identify your series, and test whether the handle setscrew is loose. Removing the panel to access the rollers is where we recommend stopping.
We’ve seen homeowners drop a panel onto a bare foot, bend the track with a pry bar, and strip the roller bracket screws beyond reuse. By the time we arrive, the repair is twice what it would have been. If you determine your door is dragging or failing, call (386) 200-9224 and we will quote you honestly over the phone.
FAQs
In most Florida homes, Simonton roller assemblies last 8 to 15 years, but salt-air exposure near Biscayne Bay and sandy soil can cut that to 7 or 8 years. The failure is almost always gradual wear and corrosion, not sudden breakage. If your door is over 10 years old and getting stiff, the rollers are due. Call (386) 200-9224 for an honest assessment and a free estimate.
For handles, sometimes yes – a loose setscrew or a misaligned lock lever is a repair, not a replacement. For rollers, no. Worn roller assemblies cannot be rebuilt in a way that lasts. The good news is that roller replacement is a same-visit job in most Palmetto Bay homes once we identify your series. For an exact quote on your door, call (386) 200-9224.
Most handle, roller, and lock replacements on Simonton sliders are completed in 60 to 90 minutes. Track replacement takes longer, typically 2 to 3 hours. We complete most parts jobs in a single visit, and our technicians arrive with the common Simonton hardware on the truck so we don’t leave a job half-finished.
We stock common Simonton roller assemblies, handle sets, and locks for the 6100, 6200, and 6500 series, which covers the majority of Palmetto Bay homes. If your door needs a less common part, we order it and return to install it once it arrives. You’ll know exactly what we ordered, what it costs, and when we’ll be back. For availability on a specific part, call (386) 200-9224 and ask.
Contact TruePane Windows & Doors
TruePane Windows & Doors is an independent service provider, not affiliated with Simonton. We’re a local Palmetto Bay company led by Dale Kessler, a second-generation glazier who has been working on window and door hardware in Miami-Dade for going on two decades. We know Simonton hardware, we also work with Andersen, Pella, and other lines, and we’re not done until the door slides square and locks without a fight. If it is not right in the opening, it will not be right in a hurricane. Call (386) 200-9224 for a free estimate on your Simonton sliding or patio door repair.
Written by Dale Kessler, Owner, TruePane Windows & Doors at TruePane Windows & Doors, serving Palmetto Bay and nearby areas.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.