Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterCGI Energy-Efficient Windows in Palmetto Bay: What to Know First
CGI energy-efficient windows in Palmetto Bay can be repaired, reglazed, or replaced without voiding the original manufacturer warranty when the work is done with OEM or warranty-safe parts and documented properly. Most CGI energy-efficient window service calls in Palmetto Bay run between $280 and $1,400 depending on whether we’re replacing a failed insulated glass unit, re-sealing a frame, or swapping worn weatherstripping and hardware. We are an independent CGI service provider, not a factory store, which means we quote the work straight and show you on paper exactly which parts are going in and why.
If you own a CGI window that’s fogged, drafty, or letting heat through, call (386) 200-9224. A live person answers, and we’ll tell you over the phone whether this sounds like a $300 seal job or a full sash replacement before anyone schedules a truck roll.
How CGI Products Fail - and How We Fix Them
CGI builds a serious impact window. But energy efficiency claims live in the glass package, and that’s where Palmetto Bay’s salt air and humidity do their work over time. Here’s what we see most often in the field.
- Fogged insulated glass in older CGI Estate Collection units. The Estate line shipped with double-pane glass from the factory, and the edge seals eventually fail in this climate. Fog between the panes means the argon gas is gone and the Low-E coating is slowly oxidizing. We replace the full IGU with a new Low-E argon-filled unit cut to the exact opening, and we register the new glass warranty before we leave the driveway.
- Drafty corners on CGI Sentinel Series casement and awning windows. The Sentinel line uses a multi-point locking system that, over years of salt-air exposure, can develop slight play in the corner keeps. The sash looks closed but isn’t seating tight, and that’s where conditioned air leaks out. We adjust the locking points, replace worn keeps, and re-bed the frame if the original sealant has dried out.
- UV fade complaints on CGI’s standard clear glass. Many Palmetto Bay homes have original CGI windows that predate today’s Low-E standards. Owners notice floors and wood furniture fading on the south and west sides of the house. We retrofit those panes with high-performance Low-E glass that cuts UV transmission significantly, without changing the look of the window from the street.
- Condensation at the bottom corners of CGI fixed-lite picture windows. This often gets misread as a glass failure. What we usually find is failed perimeter sealant letting humid outside air contact the cooler interior glass surface. We remove the old sealant, repair any oxidation on the frame, and re-seal with a marine-grade compound rated for South Florida exposure.
- Hard-to-operate sliders in CGI’s 8000 Series horizontal rolling windows. When the rollers wear and the track fills with sand and salt residue, the panel drags and the homeowner stops closing it fully. A window that’s open an eighth of an inch is an energy leak all summer. We replace the rollers, clean and lubricate the track, and align the panel so it seats flush against the weatherstripping.
Our CGI Energy-Efficient Windows Process
Every CGI job follows the same sequence, whether it’s one fogged pane or a full wall of replacements.
- 1
Call and diagnosis. You talk to a person. We ask what you’re seeing, when it started, and which side of the house it’s on. That tells us a lot before we even arrive.
- 2
Site visit and measurement. Our technician measures every opening twice. Age of the frame, condition of the sealant, and which direction the window faces all get noted. Nothing goes in until the opening is verified square and plumb.
- 3
Parts decision on paper. For hardware and glass replacement, we quote OEM CGI parts where they make sense and quality aftermarket equivalents where they perform equally well at a better price. You see both side by side, in writing, with warranty durations stated.
- 4
The repair or replacement. We pull the failed glass or component, clean the frame, set the new part, and check the reveal. Dale’s rule applies here: if it’s not right in the opening, it’s not done.
- 5
Test and document. We check the seal, cycle the window, and verify the Low-E orientation. Both warranty layers get registered in writing before the truck leaves.
- 6
Cleanup and walkthrough. The drop cloth comes up, the glass gets wiped, and you inspect the work with the technician standing right there. If it’s not done right, we fix it under the Done Right Promise.
What CGI Energy-Efficient Windows Costs in Palmetto Bay
Straight numbers, the way we quote them at the kitchen table.
- Single IGU replacement in a CGI Estate or Sentinel window: $280 to $600 installed, depending on glass type and size.
- Full sash replacement with Low-E argon glass: $600 to $1,200 per sash for standard sizes.
- Weatherstripping and hardware refresh on one window: $120 to $300.
- Full-frame energy retrofit on an existing CGI opening: $900 to $2,400 per opening, depending on size and glass package.
What moves the price: glass thickness, Low-E coating level, whether the frame needs rebuilding, and how the existing opening was set in the first place. We don’t change the price after we start, and we have a permanent 5% discount for seniors and veterans. Call (386) 200-9224 for a written, line-item estimate. It’s free.
Why Palmetto Bay Homeowners Call TruePane Windows & Doors for CGI Work
We’ve been working windows and doors in this part of Miami-Dade since 2008, and Dale Kessler grew up near Old Cutler Road, so the climate here isn’t a theory to us. We know what Biscayne Bay does to a window in August, and we quote accordingly. Every job carries the Done Right Promise: if it’s not right, we make it right, no arguing, no fine print. And when a CGI window isn’t the right fix, we’ll tell you that too. We install and service Andersen, Pella, and PGT alongside CGI, so you get an honest comparison, not a sales pitch for one brand.
FAQs
No, not when the work is done with warranty-safe parts and documented properly. We use OEM CGI components where they matter and register both warranty layers in writing before we leave. Manufacturers void warranties for undocumented aftermarket work and missed paperwork, not for competent independent service.
Yes. We match the Low-E coating, glass thickness, and tint to the rest of your window openings so the repaired unit doesn’t read differently from the street or from inside. If your original glass is no longer made, we’ll quote the closest available equivalent on paper before ordering.
Typical turnaround from diagnosis to finished repair runs three to seven business days, depending on whether the IGU is stocked locally or needs to be fabricated. We’ll give you a date, and we honor it. Call (386) 200-9224 and we’ll tell you the real timeline for your specific window.
If the frames are sound and the opening is tight, replacing the glass package is almost always the better spend. A new IGU with Low-E argon glass in a solid CGI frame performs as well as a new window for a third of the cost. If the frame has water damage or the opening has shifted, that’s a different conversation, and we’ll show you both options with prices.
Yes. We’ll walk the house and identify which windows are losing conditioned air, which glass packages should carry Low-E, and which openings need hardware adjustment before you spend any money on new glass. The audit is free with any repair, and it’s the same evaluation we give our own work.
Written by Dale Kessler, Owner, TruePane Windows & Doors at TruePane Windows & Doors, serving Palmetto Bay and nearby areas.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.