Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Trusted Shingle, Tile & Metal Roofing for Palmetto Bay Homeowners
Shingle, tile, and metal roofing in Palmetto Bay means choosing the right material for a coastal climate that punishes the wrong one. We see it every season: asphalt shingles lifting after a summer squall, barrel tiles cracked from fallen fronds, metal panels corroding where salt air meets fasteners that were never meant for the job. TruePane Windows & Doors has served homeowners across South Florida since 2008, and Dale Kessler still runs every install by the same rule that named the company: if the work is not true, the job is not done. Call (386) 200-9224 and a live person answers, day or night.
We install and service all three roofing systems with the same discipline we bring to every window and door we set. No subcontracted crews. No mystery materials. Just background-checked, uniformed technicians who measure twice, quote on paper, and stand behind the work in writing.
Key Takeaways
- Shingle, tile, and metal roofing each demand different fastening methods, underlayment, and flashing details specific to Palmetto Bay’s wind and salt exposure.
- TruePane brings years of South Florida trade experience to every roofing job, backed by The Keystone Standard and our Done Right Promise.
- We quote manufacturer lines side by side on paper so you see exactly what you are paying for before work begins.
- Call (386) 200-9224 any time. A live person picks up, not a voicemail tree.
What Our Shingle, Tile & Metal Roofing Service Includes
Asphalt Shingle Roofing
Asphalt shingles remain the most common roofing choice in Palmetto Bay because they balance upfront cost with reliable performance in wind-driven rain. A properly installed shingle roof sheds water through overlapping courses, but the system only works when the underlayment is sealed, the nails are placed in the correct zone, and the flashing is set before the first shingle goes down. We replace damaged shingles, repair lifted or curled tabs, and perform full re-roofs using manufacturer-specified installation methods. Every shingle roof we touch gets a written inspection of the decking beneath it before we quote anything.

Tile Roofing
Clay and concrete tile roofs are everywhere in Palmetto Bay, and for good reason: they handle UV exposure better than almost any other material and can last decades when maintained. The failure we see most often is not the tile itself but the underlayment beneath it, which breaks down long before the visible surface does. We repair cracked and broken tiles, re-bed ridge caps, and replace failed underlayment without disturbing the tile field unnecessarily. Our technicians walk tile roofs the way a glazier handles plate glass: carefully, deliberately, and only where the roof structure allows it.

Metal Roofing
Standing seam and metal panel roofs are gaining ground in Palmetto Bay because they reflect heat and resist wind uplift better than most traditional materials. The catch is that metal roofing lives and dies by its fasteners and flashing. We see rusted screws, loose clips, and improperly lapped panels that have let water in for years before anyone noticed. TruePane installs and repairs metal roofing with corrosion-resistant fasteners rated for coastal exposure and seals every penetration with materials matched to the panel profile. If the metal is not true, the job is not done.

Roof Inspection & Leak Diagnosis
Most homeowners call us when they see a stain on the ceiling and assume the roof is failing. Often the real problem is a failed pipe boot, a nail pop, or a cracked valley flashing that has been leaking for months. We trace leaks from the inside out, using moisture meters and visual inspection of the attic and decking to find the actual entry point. Then we write the repair scope in plain English, with photos, so you know what you are paying for before we start. No vague “roof work” line on the bill.

Repairs vs. Replacement
Not every roof needs to come off. We replace individual shingles and tiles, re-seal flashings, and repair metal panel seams when the surrounding material still has life in it. The decision point is always the same: if the underlayment is compromised or the decking is soft, patching the surface buys time but not a solution. We will tell you straight which camp your roof falls into and show you the evidence. A square deal means you never pay for a full replacement when a repair is the honest answer.

Storm & Wind Damage Repair
Palmetto Bay sits in a hurricane zone, and even tropical-storm-force winds can lift shingles, crack tiles, and peel back metal panels. After a storm, we respond fast to tarp damaged sections, secure loose material, and document everything for your insurance claim. Our written assessments include the age and condition of the roof before the storm, which matters when adjusters try to attribute old wear to new damage. We have walked hundreds of Palmetto Bay roofs after storms, and we know what wind damage actually looks like versus what years of sun and rain did.

What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service for Shingle, Tile & Metal Roofing
We work across the major roofing material lines stocked in South Florida and hold specific installation training for the systems we recommend most. Our team has installed and serviced metal roofing panels from ECO Window Systems, an ES Windows line that holds up well in coastal conditions when the flashing details are right. We have also worked extensively with Mr-Glass for specialty glazing components where roof transitions meet skylights and solar tubes. These are not brands we read about in a catalog; these are materials we have handled on actual Palmetto Bay roofs, in actual Palmetto Bay weather.
When a homeowner has a roof tied to a specific manufacturer line, we respect the system’s engineering. That means using compatible underlayments, correct fastener types, and the manufacturer’s published details rather than field substitutes. If you have an ECO Window Systems panel roof or a Mr-Glass skylight curb that has been leaking for years, we will service it correctly. And if your roof uses a different brand entirely, we can help with that too as long as the materials are available in our market. The brand matters less than the installation method, and the method is where we do not compromise.
Signs You Need Shingle, Tile & Metal Roofing Right Now
- Water stains on ceilings or walls. A stain means water has already breached the roofing system and is traveling through your attic or wall cavities. By the time you see it, the leak has usually been active for weeks.
- Granules in the gutters. Asphalt shingles shed granules as they age, and a heavy accumulation in your gutters or at downspout outlets means the shingle surface is breaking down. Granule loss accelerates quickly once it starts.
- Cracked, broken, or slipped tiles. A single cracked tile can let water reach the underlayment, and over time that underlayment rots. In Palmetto Bay, falling branches and hurricane debris make this more common than most homeowners expect.
- Rust streaks or fastener pops on metal panels. Metal roofing depends on its fastener system, and rust or lifting screws are the first signs that the seal is failing. Left alone, those small points become big leaks.
- Visible sagging or soft spots on the roof deck. If you can see a dip in the roof plane from the ground, or if the deck feels soft when walked, the structural layer beneath the roofing material has started to fail. This is past the point of a surface repair.
Our Shingle, Tile & Metal Roofing Process – Step by Step
- 1
Inspection and documentation. We start by walking the roof where safe, checking the attic, and photographing everything we find. You receive a written summary with photos and measurements, not a verbal “it looks okay.”
- 2
Written quote with manufacturer lines stated. We price the job in writing, including the specific underlayment, flashing, and fastener products we will use. No allowances for mystery materials, no change orders hiding in the fine print.
- 3
Scheduling and preparation. We confirm the date, the crew, and the scope in writing. Our team arrives in uniform, background-checked, and ready to protect your landscaping and exterior surfaces before any material comes off.
- 4
Installation or repair work. Our technicians work to the manufacturer’s published standards and the Florida Building Code requirements for Miami-Dade County. Every penetration gets sealed, every flashing gets set, and every fastener gets checked before we call the job done.
- 5
Final walkthrough and warranty registration. We walk the roof with you, review what we did, and register both manufacturer warranty layers in writing before the truck leaves the driveway. The Done Right Promise applies to every job, no exceptions and no paperwork fights.
How Much Does Shingle, Tile & Metal Roofing Cost in Palmetto Bay?
Roofing costs in Palmetto Bay depend heavily on the material system and the condition of the roof deck beneath it. As a practical guide, minor shingle repairs typically run $350 to $800, while individual tile replacements usually land between $25 and $60 per tile depending on access and matching requirements. Full roof replacements are a different conversation: a complete asphalt shingle re-roof in Palmetto Bay generally falls between $14,000 and $28,000 for a single-family home, while tile and metal systems run higher, often $28,000 to $55,000 or more depending on the profile and structural requirements. These are honest ranges based on what we have quoted in this market, not national averages that ignore South Florida wind codes and material logistics.
What affects the price more than anything is the condition of the underlayment and decking. If the structural layer has water damage or the underlayment has exceeded its service life, the scope expands quickly. We avoid overpaying by quoting the full scope up front, including any decking replacement we can anticipate, so there are no surprise line items on the bill. Every estimate includes a written line item for every material and labor component. That is the only way to compare quotes honestly, and it is the only way we do business.
Shingle, Tile & Metal Roofing Near Palmetto Bay – Our Service Area
We serve Palmetto Bay and the surrounding South Miami-Dade communities, including Kendall, Cutler Bay, Three Lakes, Country Walk, Goulds, Richmond Heights, Richmond West, South Miami Heights, Sunset, The Crossings, and The Hammocks. Our roofing crews are familiar with the HOA requirements in these neighborhoods and the specific wind-load codes that apply to each municipality. If you need Shingle, Tile & Metal Roofing in Kendall, we handle that work with the same written warranty registration. For homeowners further south, see our Shingle, Tile & Metal Roofing in Cutler Bay page for service specifics in that area. And if you are on our main site, you can always return to the home page or review this Shingle, Tile & Metal Roofing in Palmetto Bay page for full details.
Serving Palmetto Bay, FL - Our Local Coverage Area
We’re based in the Palmetto Bay area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
Frequently Asked Questions – Shingle, Tile & Metal Roofing in Palmetto Bay
Shingle, tile, and metal roofing are three distinct roofing systems, each with different materials, installation methods, and lifespans. Asphalt shingles are the most common and the most economical, clay or concrete tiles offer long-term durability and a traditional South Florida look, and metal panels provide wind resistance and heat reflectivity. In Palmetto Bay, all three must be installed to Miami-Dade County wind-load requirements. Our team is trained in all three systems and will recommend the right one for your home based on structure, exposure, and budget.
Minor repairs such as replacing a few shingles or tiles usually take a single day, sometimes less. A full roof replacement typically runs three to eight days depending on the material, the roof’s complexity, and whether the decking needs repair. Weather plays a role in scheduling, especially during Palmetto Bay’s rainy season, but we will give you a written timeline before we start. We will be there when we say, and we will not leave the job half-finished.
Roofing costs in Palmetto Bay range from a few hundred dollars for targeted repairs to over $50,000 for a complete tile or metal replacement on a larger home. The factors that move the price are material choice, roof size, decking condition, and access difficulty. We provide a written line-item quote for every job, so you see exactly where your money goes. Call (386) 200-9224 for a free, no-obligation estimate.
Yes, we have direct experience with ECO Window Systems metal panels and Mr-Glass skylight components, including the flashing details those products require. We install and repair these systems to the manufacturer’s published specifications, which is the only way to keep their warranties valid. If your roof uses one of these brands, we can service it. If it uses another brand, we can likely help with that too.
Yes, a live person answers our phone 24 hours a day, 7 days a week at (386) 200-9224. After a storm or a sudden leak, we can walk you through temporary measures to protect your home while we schedule a full inspection. We respond to Palmetto Bay roofing emergencies with the same written documentation and straight pricing we use on every job.
Every roofing job is covered by our Done Right Promise, which means if it is not done right, we make it right with no paperwork fights and no arguing. Beyond that, we register both manufacturer warranty layers in writing before the truck leaves the driveway. The Keystone Standard means the warranty durations are stated clearly, so you know exactly what you are getting and for how long.
Before we arrive, move vehicles out of the driveway and clear any outdoor furniture or plants that could be damaged by falling debris. Inside, move valuables away from attic access points, since roofing work can shake loose dust and small debris. We will handle protecting your landscaping and exterior surfaces with tarps and barriers. After the job, we walk the property with you to make sure everything is clean and the work is done right.
Schedule Your Shingle, Tile & Metal Roofing Service in Palmetto Bay Today
If your roof is showing signs of trouble, or if you simply want a straight assessment from a company that has served South Florida since 2008, call TruePane Windows & Doors at (386) 200-9224. A live person answers, day or night, and your estimate is free and no-obligation. We will measure every opening twice, quote on paper, and stand behind the work in writing. If the roof is not true, the job is not done.
Written by Dale Kessler, Owner at TruePane Windows & Doors, serving Palmetto Bay and South Florida since 2008 with years of community trade heritage.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.



Before
After
Before
After
Before
After