Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterBay & Bow Windows in Palmetto Bay, FL
Bay and bow window replacement in Palmetto Bay typically ranges from $3,800 to $8,500 depending on the size, structural reinforcement needed, and the specific manufacturer line chosen. Because these windows project outward from your home’s exterior, they require precise structural support and water-tight flashing to prevent the leaking and wood rot we often see in our humid, storm-prone Florida climate. At TruePane Windows & Doors, we handle the entire window installation project from initial measurement to final trim, ensuring your new window is installed to last for decades. Call (386) 200-9224 for a free estimate on your project.
If you are looking to add light, create a cozy reading nook, or simply replace an aging projection window that has started to sag, you are in the right place. We are a second-generation glazier company founded by Dale Kessler, and we treat every installation with the same care we would use on our own homes. Installing a bay or bow window is more complex than a standard Window Installation in Palmetto Bay because it involves roof flashing, weight distribution, and precise exterior sealing. Our team understands how to properly support these units so they don’t pull away from the wall over time.
We know that homeowners in Palmetto Bay aren’t looking for a quick fix that will cause problems during the next hurricane season. We are an authorized installer for brands like PGT, CGI, and ES Windows, and we provide side-by-side quotes on paper so you can see exactly what you are paying for. Every job we do is backed by our Done Right Promise and The Keystone Standard, meaning both manufacturer warranty layers are registered in your name before our truck leaves your driveway. Whether you want to return to our home page or learn about our full range of services, we are here to provide the steady, honest advice you need.
When You Need Bay & Bow Windows
Bay and bow windows are distinct architectural features that can transform a room, but they are also prone to specific issues if casement windows and other styles are installed incorrectly. We see these problems regularly in Palmetto Bay homes, especially those built before the current, more stringent building codes.
- Sagging or “Drooping” Windows: If your bay window appears to be leaning away from the house, the support brackets or the cable system underneath has likely failed. This is a common issue with older installations that were not properly reinforced to handle the weight of heavy impact-rated glass.
- Water Intrusion and Dry Rot: Because bay and bow windows project from the exterior wall, they have a “roof” section that is exposed to the elements. If the flashing was not sealed correctly, water can seep behind the siding, leading to soft wood, mold, and damage to your interior drywall.
- Seal Failure and Fogging: If you see condensation trapped between the panes of glass, the seal has failed. In our hot Palmetto Bay summers, this fogging makes the window look dirty and significantly reduces its energy efficiency, causing your AC to work harder than necessary.
- Drafts and Air Leaks: If you feel a breeze around the window frame or if the room temperature fluctuates significantly near the window, the weatherstripping has likely worn down or the frame has shifted. We see this often in homes where the window was not properly shimmed or insulated during the initial installation.
- Outdated Aesthetics: Many homes in this area were built with standard windows, and a bay or bow window is an excellent way to update the look of your home while creating a new focal point in your living room or kitchen.
If you notice any of these symptoms, it is time to have an expert look at the structural integrity of your window system. Call (386) 200-9224 to have us inspect your current setup.
Our Bay & Bow Windows Process
We do not use a “franchise playbook” or rushed installation methods. Our process is rooted in the founding rule Dale Kessler keeps on the whiteboard: if the pane is not true, the job is not done. Here is how we handle your bay or bow window project in Palmetto Bay.
- Detailed Site Assessment and Measurement: We do not guess. Our uniformed, background-checked technicians come to your home to measure the opening twice and inspect the existing structural support. We check for rot in the header and ensure the wall can support the weight of the new unit.
- Manufacturer Selection and Paper Quotes: We sit down with you to review options from brands like PGT or CGI. We provide side-by-side quotes on paper so you can compare the pros and cons of different frame materials and glass packages without any hidden costs or pressure.
- Preparation and Structural Reinforcement: Before we install the new window, we ensure the rough opening is square, plumb, and level. If the old window damaged the surrounding sill or siding, we address those repairs first. We don’t hide problems behind new trim.
- Precision Installation and Flashing: We install the window unit, ensuring it is properly shimmed and secured to the house framing. Crucially, we apply high-grade flashing and sealants to the “roof” and sides of the bay window to prevent water intrusion. This is where most installers cut corners, but we prioritize water-tightness above all else.
- Final Inspection and Warranty Registration: Once the window is set and the trim is finished, we inspect the operation of every moving part. We then register both manufacturer warranty layers in your name before we leave. You get the paperwork in your hand, so you know exactly what is covered.
Bay & Bow Windows Pricing in Palmetto Bay
Pricing for bay and bow windows varies significantly based on the size of the opening, the complexity of the support structure, and the performance rating of the glass. Because we do not provide “ballpark” numbers over the phone without seeing the site, we offer free, honest estimates after our initial assessment of your fixed & picture windows or bay and bow project. However, to give you an idea of what to expect in the Palmetto Bay market, see the table below.
| Project Component | Estimated Cost Range |
|---|---|
| Standard Replacement (existing opening) | $3,800 - $5,500 |
| Structural Upgrade & Reinforcement | $5,500 - $7,200 |
| Custom Large-Scale Projection Unit | $7,200 - $8,500+ |
Factors that influence these numbers include whether you choose high-impact glass, which is standard for many coastal Florida homes, or standard energy-efficient glass. We also factor in the cost of matching your existing exterior siding or trim work. We offer an upfront, no-hassle price. Call (386) 200-9224 to schedule your free estimate and get a firm number for your home.
FAQs - Bay & Bow Windows
How long does it take to install a bay or bow window in Palmetto Bay?
Most bay and bow window installations are completed in a single day, though larger or more complex projects requiring structural header work can take two days. We arrive on time, prepared with the right tools and materials, and we work until the job is done right. Call (386) 200-9224 if you need to schedule a visit.
Is it better to repair an old bay window or replace it entirely?
If the issue is minor, such as a piece of weatherstripping, we can often perform a repair, but if the window is sagging, leaking, or has failed seals, replacement is almost always the more cost-effective choice. Repairing a structural sag in a bay window is labor-intensive and rarely offers the long-term reliability of a new unit or garden & basement windows installed with modern materials. Call (386) 200-9224 for an honest assessment of your specific situation.
Do I need a permit for a bay window replacement?
Yes, most window replacements in Palmetto Bay require a permit, especially when the installation involves structural changes or impact-rated glass for hurricane protection. We handle the paperwork and coordination for the permits, so you do not have to worry about the regulatory side of the project. We ensure every job meets local code requirements.
Can you match the style of my existing windows?
Yes, we work with a wide range of manufacturers like PGT, CGI, and ES Windows to ensure your new bay or bow window matches the color, grid pattern, and style of your home’s other windows. We bring samples and brochures during our consultation so you can see the finish and hardware options in your own light. Call (386) 200-9224 to start your design process.
Written by Dale Kessler, Owner at TruePane Windows & Doors, serving Palmetto Bay.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.