Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Trusted Window Installation for Palmetto Bay Homeowners
Window installation in Palmetto Bay is a job you want done once, correctly, by a crew that understands how Florida weather treats a house. Salt air, tropical humidity, and the sun that bakes Old Cutler Road every afternoon all work against a window from the day it goes in. TruePane Windows & Doors has been setting windows in this community since 2008, and our lead installer is Dale Kessler, a second-generation glazier who founded this company in 2008 because he was tired of watching out-of-true installs fail early. We install casement, awning, fixed and picture, single and double hung, sliding, and bay and bow windows, and we do it with manufacturer warranties registered in writing before the truck leaves your driveway. Call (386) 200-9224 to talk to a live person about your project, any hour of the day or night.
What Our Window Installation Service Includes
Every window we set follows the same discipline: measure twice, level the rough opening, flash it so water never finds a way in, set the unit square and plumb, then seal and trim. What changes from one style to the next is the hardware, the weight, and how the window is meant to perform in a Palmetto Bay home. Here is how we handle each one.
Casement Windows
Casement windows hinge on the side and crank outward, which makes them the tightest-sealing operable window you can put in a coastal climate. In Palmetto Bay, where afternoon thunderstorms roll in fast off Biscayne Bay, that compression seal is the difference between a dry sill and a wet one. We set casement units with full-perimeter shims and anchor them through the frame, not the sash, so the crank mechanism stays true for decades.

Awning Windows
Awning windows hinge at the top and push outward from the bottom, letting you keep them open during a light rain without water coming in. They work well in Palmetto Bay kitchens and bathrooms, where ventilation matters but so does keeping the afternoon humidity from pouring through a gap. Dale checks the hinge geometry and the operator arm on every awning unit before it goes in the opening, because a binding awning window is usually a hinge that was set under tension from day one.

Fixed & Picture Windows
Fixed and picture windows do not open, which means the entire job is about the seal and the glass. Florida building code treats these as fenestration that must meet specific wind-load ratings, especially in a coastal zone like Palmetto Bay. We make sure the glass package is matched to the exposure, the frame is anchored to the studs at the proper spacing, and the exterior flashing is lapped so water sheds outward instead of finding the sheathing.

Single & Double Hung Windows
Single hung windows have a fixed top sash and a moving bottom sash. Double hung windows let both sashes move. Both are common in older Palmetto Bay ranch homes, and both fail predictably when the jamb liner or the balance system is set wrong. Our crew checks the balance tension with the sash in place, adjusts it until the window holds position at any height, and only then calls the install finished.

Sliding Windows
Sliding windows run on a track, and a track that is out of level by an eighth of an inch will wear the rollers and let the window bind within a season or two. That is the kind of mistake you do not see on the day of the install, but you feel it when you are fighting the window in July. We shim the track dead level, square the frame, and test the window through its full travel before we clean up.

Bay & Bow Windows
Bay and bow windows project outward-bay with a center fixed unit and two angled sides, bow with four or more units to create a gentler curve. Both require structural support under the projection, which means the rough opening, the header above, and the knee bracing below all need to be evaluated before the window goes in. Dale has set bay and bow windows in homes across Palmetto Bay, Kendall, and Cutler Bay, and he treats every one as a small structural project, not a simple sash swap.

What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service for Window Installation
TruePane is an authorized installer for PGT and CGI, the two manufacturers whose name most Palmetto Bay homeowners ask about when hurricane season gets close. PGT makes a wide range of impact-rated units, and we have set enough of them to know their anchoring schedules and water-barrier requirements by heart. CGI is a different beast, heavier and built around a more streamlined frame design, and we stock their OEM hardware and follow their installation manual page by page so the warranty stays intact.
We also work regularly with ES Windows, which is a favorite of architects working on the modern homes going up along the bay side of Palmetto Bay. Those are big, heavy units with narrow sightlines, and they demand a crew that knows how to handle them without twisting the frame. Whether you have PGT, CGI, ES Windows, or any other make, the same rule applies: we register both warranty layers in writing before we leave, and we stand behind the installation for 90 days under our Done Right Promise.
Signs You Need Window Installation Right Now
- The window will not open or close without a fight. You should not need two hands and a hip check to move a window. When a window binds, something is out of true, and forcing it just bends hardware and tears up the weatherstripping.
- You can see daylight through the sash or feel a draft on a still day. A window that lets air through when it is closed is not doing its job. In Palmetto Bay, that means higher cooling bills, and in a storm, it means water where you do not want it.
- There is water staining on the drywall or the window stool after rain. That stain is the evidence of a leak you may not see while it is happening. Once moisture is in the wall cavity, it attracts mold and rots framing, and the fix gets more expensive every month it waits.
- The glass is fogged between the panes. A failed seal means the insulating gas has escaped and the window has lost its thermal performance. On a hot Palmetto Bay afternoon, that fog is your window telling you it has stopped doing half its job.
- The exterior frame is soft, cracked, or pulling away from the house. Wood rot and failed caulk joints let water behind the frame. If the frame is pulling away, the window is no longer anchored the way the building code intends, and that is a safety issue during a named storm.
None of these are problems that fix themselves, and none of them get cheaper with time. A free estimate from TruePane tells you exactly what is wrong and what it costs to make it right, with no obligation to go further. Call (386) 200-9224.
Our Window Installation Process - Step by Step
Here is how a TruePane window installation goes in Palmetto Bay, from the first call to the last sweep of the broom. We keep it simple because the work is complicated enough without mystery.
- 1
Measure and inspect. We measure every opening twice and inspect the existing frame, the rough opening, and the surrounding wall for water damage or structural issues. If the opening is not square, we note it on paper and plan for it before the window arrives.
- 2
Quote on paper, side by side. Dale or one of our senior technicians walks you through the options, manufacturer line by manufacturer line, with pricing written out. You see exactly what you are buying and what each upgrade costs.
- 3
Remove the old unit carefully. We cut the old fasteners, remove the sash and frame without tearing up the surrounding wall more than necessary, and then inspect the opening one more time before anything new goes in.
- 4
Set the new window level and true. We shim the unit at the load points, check it with a level on every plane, and anchor it through the frame into the studs per the manufacturer’s instructions and Florida code. The flashing goes on in layers so water drains out, never in.
- 5
Seal, trim, and register the warranty. We seal the interior and exterior, install interior trim if your project calls for it, then register both warranty layers with the manufacturer in writing before the truck leaves the driveway. You get copies of everything.
We do not use day labor or subcontract the work out. The people who show up at your Palmetto Bay house are our employees, background-checked and uniformed, and they work the way they would in their own mother’s home.
How Much Does Window Installation Cost in Palmetto Bay?
Window installation in Palmetto Bay varies by window style, size, and whether you are putting in a standard unit or an impact-rated one. As a starting point, a standard single hung vinyl window in a typical Palmetto Bay ranch home runs about $450 to $850 installed, depending on size and what we find when the old window comes out. A mid-range casement window usually lands between $700 and $1,400. Impact-rated windows from PGT or CGI, which are a common ask here because of Miami-Dade’s position in the high-velocity hurricane zone, run from $1,800 to $4,000 or more per opening, depending on the size and the glass package. A bay or bow window project in Palmetto Bay is its own creature, often starting around $3,500 and going up from there based on structural work.
What affects the price most is the condition of the rough opening. If there is hidden water damage, rotted framing, or an opening that is not square, the cost goes up because we will not set a new window on a bad foundation. You avoid overpaying by getting a written, line-item quote that breaks out the window, the install labor, and any structural repair separately. That is what we give every homeowner, every time. The free estimate includes all of this, with no pressure and no surprise line items. Call (386) 200-9224 to schedule one.
Window Installation Near Palmetto Bay - Our Service Area
TruePane serves Palmetto Bay and the surrounding communities, including Window Installation in Kendall, Window Installation in Cutler Bay, Three Lakes, Country Walk, Goulds, Richmond Heights, Richmond West, South Miami Heights, Sunset, The Crossings, and The Hammocks. Most window installation projects in this area are scheduled within a week or two, and we arrive when we say we will. Our team knows these neighborhoods, the building codes that apply, and the way the coastal air wears on a window, because we have been setting them here for over four decades. You can also learn more about our full range of work on our home page.
Serving Palmetto Bay, FL - Our Local Coverage Area
We’re based in the Palmetto Bay area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
Frequently Asked Questions - Window Installation in Palmetto Bay
Window installation is the process of removing an old window and setting a new one in its opening, level, square, sealed, and anchored to code. The work includes flashing the rough opening so water sheds outward, shimming the unit at its load points, insulating the gap between frame and stud, and sealing the interior and exterior. A proper installation is the difference between a window that lasts twenty years and one that fails in five.
A straightforward single window replacement in Palmetto Bay typically takes two to four hours from arrival to cleanup. A full-house project with ten or more windows usually runs two to four days, depending on what we find in the openings and whether structural repair is needed. We complete most individual window jobs in a single visit, and we give you a written timeline before the work starts.
A standard vinyl single hung installation in Palmetto Bay generally costs $450 to $850 per window, impact-rated windows run $1,800 to $4,000 or more per opening, and bay or bow projects typically start around $3,500. The final number depends on window style, size, glass package, and the condition of the rough opening. Our free estimate gives you line-item pricing so you see exactly where every dollar goes, and the price on your quote is the price on the bill. Call (386) 200-9224 for an exact quote - estimates are free.
Yes, TruePane is an authorized installer for both PGT and CGI, and we set and service their units throughout Palmetto Bay and the surrounding communities. We follow each manufacturer’s installation manual to the letter, register both warranty layers in writing, and maintain the OEM hardware for their product lines. If you have a PGT or CGI window that needs attention, call us and we will tell you straight what it needs and what it costs.
Yes, and a live person answers our phone 24 hours a day, seven days a week, so you will always reach a human being when you call (386) 200-9224. If a window is broken, leaking, or leaving your home exposed, we prioritize getting it secured and will schedule the permanent install as quickly as the job allows. We will be there when we say, no voicemail trees and no callbacks from a regional call center.
Every TruePane installation carries our Done Right Promise: if the work is not right, we make it right, with no paperwork fights and no arguing. Under our Keystone Standard, we also register both manufacturer warranty layers in writing before the truck leaves your driveway, and you get copies with the durations stated plainly. We stand behind the work because Dale’s founding rule is simple: if the pane is not true, the job is not done.
Clear a path to the window inside and out, move furniture at least three feet away, and take down curtains, blinds, or anything hanging on the window. If there are pictures or shelves on the same wall, remove them, because setting a window does send some vibration through the framing. Our crew lays down drop cloths and cleans up before they leave, and we will tell you at the quote stage if there is anything else your specific project needs.
Schedule Your Window Installation Service in Palmetto Bay Today
A window set out of true fails early, and you have likely seen enough of that already. Call TruePane Windows & Doors at (386) 200-9224 for a free, no-obligation estimate on window installation in Palmetto Bay. A live person answers, day or night, and Dale Kessler still walks every quote that comes through this office. We will measure twice, quote you straight, and set the window right the first time.
Written by Dale Kessler, Owner at TruePane Windows & Doors, serving Palmetto Bay since 2008.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.



Before
After
Before
After
Before
After