Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterVLX 100 Bifold / Folding Door in Palmetto Bay, FL | TruePane Windows & Doors
The VLX 100 bifold door opens a wall of your home to the yard, the patio, or the pool deck with a single push. Homeowners across Palmetto Bay choose this accordion-style aluminum system when they want real indoor-outdoor living, not just a wide slider. TruePane Windows & Doors is an authorized ViewLux installation partner in Palmetto Bay, which means you get factory-backed product quality and a local crew that installs it to Florida wind-load standards. Call (386) 200-9224 for a free on-site measurement and line-item quote.
Product Overview - VLX 100 Bifold / Folding Door
The VLX 100 is an accordion-style aluminum bifold system designed for wall-to-wall openings. Panels fold against each other and stack neatly to one or both sides, leaving a clear opening that a sliding door can’t match. In a Palmetto Bay ranch home, that means the kitchen opens completely to the lanai. In a newer build near Old Cutler Road, it turns the living room into a pavilion.
This is the door series we recommend when authenticity matters. The frame is extruded aluminum with a wall thickness of 0.098 inches and a 2.56-inch profile width, which gives the door structural rigidity without looking bulky. Panels track on a reinforced bottom rail engineered for repeated daily use. The result is a door that feels solid when closed and glides predictably when open.
Aluminum matters in South Florida. Salt air off Biscayne Bay, afternoon humidity, and the occasional tropical weather system punish wood and vinyl. The VLX 100 does not warp, swell, or rust. We have installed this exact series in Palmetto Bay homes for years, and the frames still look like the day they went in. For homeowners who want the full opening but refuse to babysit a wooden door, this is the practical choice.
Technical Specifications
- Frame wall thickness: 0.098″ extruded aluminum
- Profile width: 2.56″ for clean sightlines with structural strength
- Maximum total opening span: up to 20 feet wide, with panel count determined by opening size
- Available track configurations: 2-panel, 3-panel, 4-panel, 5-panel, and 6-panel systems
- Glass choices: Clear, Low-E, Tempered, Laminated, Gray Tint, Black Tint
- Finish choices: Premium Black, Pure White, Anodized Silver, Bronze, Champagne, Teak Wood
- Screen options: Retractable screen or no screen
- Performance standards: NFRC-rated thermal break, AAMA 2400 and AAMA 2410 installation compliance, AAMA 812 low-expansion foam sealant on all perimeter joints
- Wind rating: Engineered for Florida wind-load requirements; impact-resistant laminated glass available
Performance Features
Thermal Efficiency - The VLX 100 frame includes a thermal break that separates interior and exterior aluminum surfaces. That break slows heat transfer through the metal, keeping your air conditioning inside where it belongs. When paired with Low-E glass, this system earns NFRC-rated energy performance numbers that matter on a Palmetto Bay electric bill in August.
Acoustic Performance - Multi-chamber extrusions and quality seals knock down outside noise noticeably. Homes near US-1 or under the flight approach hear the difference immediately. Laminated glass adds another layer of sound dampening for bedrooms facing the street.
Airtightness & Weather Seal - Every perimeter joint is sealed with AAMA 812 low-expansion foam applied to AAMA 2400 standards. Compression gaskets between panels block drafts when the door is closed. You should not feel air moving around a closed bifold, and with this system, you won’t.
Waterproofing - The sill is designed to channel water away from the interior, not trap it. During installation we slope the track, foam-seal all perimeter joints, and run a final water test before we pack up. Palmetto Bay thunderstorms dump rain fast, and this door is built to take it.
Wind Resistance - Every VLX 100 we install in Palmetto Bay is sized and specified for local wind-load requirements. The 0.098-inch wall aluminum and reinforced tracks hold panels rigid under pressure. Impact-resistant laminated glass is available for full storm protection with no shutters needed.
Security & Hardware - Multi-point locking hardware secures panels at top and bottom. Stainless steel rollers carry the load smoothly. There are no cheap plastic parts in the track assembly. This is hardware built for a door that gets opened and closed every single day, not twice a year.
Color & Glass Options
The VLX 100 ships in six finishes. Premium Black is the most requested in Palmetto Bay right now, especially on coastal modern homes where dark frames contrast white stucco. Pure White suits Key West-style interiors and traditional Florida homes. Anodized Silver reads minimal and architectural. Bronze and Champagne bring warmth to Mediterranean-style facades along Old Cutler Road. Teak Wood is a textured finish that gives you the look of timber without any of the maintenance.
On glass: Clear is standard and honest. Low-E is what we recommend for west-facing openings; it reflects heat and cuts cooling costs. Tempered glass meets safety glazing code for doors. Laminated glass is the storm-ready option, and when it is impact-rated, it can satisfy wind-borne debris requirements. Gray Tint and Black Tint are aesthetic choices that reduce glare, and they look sharp against lighter interiors.
Installation by TruePane Windows & Doors in Palmetto Bay
A bifold door lives or dies by its installation. The product can be perfect from the factory and still bind, leak, or sag if the rough opening is out of square or the track is not set dead level. We have torn out other installers’ work in Palmetto Bay where the panels never glided right because somebody rushed the rough framing. That is not how we work.
Every VLX 100 installation by TruePane Windows & Doors begins with a pre-install inspection. We check the rough opening dimensions, the floor flatness, and the header. Then we set the frame level, plumb, and square before anchoring anything. The sill is set on a proper bed and sloped to shed water. All perimeter joints are sealed with AAMA 812 low-expansion foam per AAMA 2400 and AAMA 2410 installation standards. After the panels are hung and adjusted, we run a water test, cycle the door repeatedly, and make final hardware adjustments. Then we clean the glass and the work area.
One thing you should know: most bifold manufacturers, including condition their warranty on professional installation per spec. An improper install does not just void the warranty, it voids the performance of the product. South Florida humidity, driving rain, and wind load amplify any installation defect. TruePane Windows & Doors installs by the book and stands behind our workmanship. That is the difference between buying a door and owning a functioning opening.
Frequently Asked Questions - VLX 100 Bifold / Folding Door
Lead times for the VLX 100 vary by panel configuration, glass choice, and finish, but most Palmetto Bay projects land between 3 and 6 weeks from final measurement to install date. Custom sizing adds time. Call (386) 200-9224 and we will give you a current production estimate for your exact configuration.
The VLX 100 can qualify for federal energy tax credits when configured with Low-E glass that meets current efficiency criteria. Eligibility depends on the specific glass package and your tax situation. We recommend confirming details with your tax professional; we can provide the NFRC performance documentation for your configuration.
The VLX 100 carries a manufacturer’s limited warranty from ViewLux covering the frame, glass, and hardware, and it stays valid when the door is installed by an authorized partner like TruePane Windows & Doors to AAMA standards. We also provide a workmanship warranty on our Palmetto Bay installations. Call (386) 200-9224 for full details.
Yes. The VLX 100 is built to your rough opening, not pulled off a shelf. Panel counts range from 2 to 6, with total openings up to 20 feet wide. We measure every opening precisely before ordering, so your Palmetto Bay home gets a door fit to the actual dimensions, not a closest-size compromise.
Aluminum bifold frames need very little ongoing maintenance. Wipe tracks clear of sand and debris every few months, keep the rollers clean, and wash the frame with mild soap and water. Avoid abrasive cleaners on anodized finishes. In Palmetto Bay’s coastal air, a quarterly track cleaning keeps the door gliding like new.
Get a Quote - VLX 100 Bifold / Folding Door in Palmetto Bay
Thinking about opening a wall in your Palmetto Bay home? Let’s measure it. We will bring finish samples, discuss glass options, and give you a fixed line-item quote before you commit to anything. Call TruePane Windows & Doors at (386) 200-9224 to schedule a free on-site measurement for the VLX 100 Bifold / Folding Door.
Written by the team at TruePane Windows & Doors, authorized ViewLux installation partners serving Palmetto Bay, FL.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.
Other TruePane Windows & Doors Services
What Neighbors Say About TruePane Windows & Doors
Detailed Images
