VLX 80 Awning Window

VLX 80 Awning Window in Palmetto Bay, FL | TruePane Windows & Doors

The VLX 80 Awning Window is a top-hinged aluminum window that opens outward from the bottom, letting you run ventilation even during a Florida downpour. It’s one of the most requested products we install in Palmetto Bay because it pairs a genuinely useful design with the strength and slim sightlines only aluminum can deliver. TruePane Windows & Doors is an authorized installation partner for the manufacturer of the VLX 80 series. That means you get factory-backed product support and a local Palmetto Bay installation team that actually knows how this window should be set, sealed, and finished. Call (386) 200-9224 to talk specs, lead times, or pricing.

Call (386) 200-9224

Product Overview - VLX 80 Awning Window

The VLX 80 is built around a simple idea: a window that stays useful when the weather turns. Because it hinges at the top and opens outward, rain hits the glass and runs off instead of coming inside. That’s a real advantage in Palmetto Bay, where afternoon storms roll through from May to October and plenty of homeowners want fresh air without watching the forecast. You can leave an awning window cracked during a storm and come home to a dry sill.

Architecturally, the VLX 80 fits where horizontal openings make more sense than tall ones. We see it specified above kitchen sinks, in bathrooms, across the top of fixed picture windows, and in hallways where a casement would swing into the room. The proportions read clean and contemporary, which suits the mix of mid-century ranches, coastal modern builds, and newer Mediterranean-style homes across Palmetto Bay.

The frame is extruded aluminum with a 0.079-inch wall thickness, which gives the sash real rigidity without the bulk of vinyl. That thin profile, just under two inches wide, maximizes glass area and keeps sightlines minimal. Aluminum also holds up to Palmetto Bay’s salt air and high UV exposure far better than wood or vinyl over time. You don’t repaint it, you don’t re-seal it every few years, and it won’t warp when humidity sits at 80 percent for weeks on end.

Buyers choose this series when they want ventilation, durability, and a window that looks like it belongs in a custom home, not a tract build. TruePane Windows & Doors installs the VLX 80 throughout Palmetto Bay with a process built around AAMA standards, so the window performs the way the factory intended. Reach us at (386) 200-9224 if you want to see a sample before committing.

Technical Specifications

Here’s what the VLX 80 brings to the table, in plain terms. These are the numbers and options that matter when you’re comparing Palmetto Bay window quotes.

• Frame material: Extruded aluminum, wall thickness 0.079 inches
• Profile width: 1.97 inches, keeping sightlines narrow and glass area generous
• Operation: Top-hinged, opens outward from the bottom via crank or multipoint handle
• Thermal break: Yes - a structural thermal barrier separates interior and exterior frame faces for NFRC-rated energy performance
• Glass types: Clear, Frosted, Low-E, Tempered, Laminated
• Frame finishes: Premium Black, Pure White, Anodized Silver, Bronze, Champagne, Teak Wood
• Screen options: Fixed screen or retractable screen
• Impact option: Laminated impact-resistant glass available for wind-borne debris zones
• Performance standards: Installed per AAMA 2400/2410; perimeter sealed with AAMA 812 low-expansion foam

Custom sizing is available. The VLX 80 is not a stock-size-only product, which matters in Palmetto Bay where existing openings rarely match a big-box standard dimension. We measure to the actual masonry or frame opening and order accordingly.

Performance Features

Thermal Efficiency - The thermal break is the star here. It interrupts the conductive path between the outside face and inside face of the frame, so the aluminum stops pulling heat into the house in August and out of it in January. With Low-E glass, the VLX 80 delivers NFRC-rated U-factor and SHGC numbers that make a measurable difference on a Palmetto Bay electric bill.

Acoustic Performance - A tight-sealing awning window does more for sound control than people expect. The compression seal closes the sash against the frame on all four sides, which reduces the amount of road noise that sneaks in. On Palmetto Bay streets that carry morning and evening traffic, laminated glass adds another meaningful layer of acoustic dampening.

Airtightness & Weather Seal - Awning windows seal tighter than sliders because the sash presses into the weatherstripping as it closes. The VLX 80 uses a multi-point closure that pulls the sash evenly into the frame, so you don’t get the corner gaps sliders develop over time. That means fewer drafts and less humid outdoor air infiltrating the conditioned space.

Waterproofing - The top-hinged design is inherently rain-friendly, but the real waterproofing story happens at installation. We seal every perimeter joint with AAMA 812 low-expansion foam, flash the rough opening properly, and slope the sill so any incidental water drains away from the wall cavity. Mist prevention between panes comes from the sealed insulated glass units, which are tested for long-term moisture resistance.

Wind Resistance - Palmetto Bay sits in a high-velocity hurricane zone, and windows here need to hold up to more than a stiff breeze. The VLX 80 is wind-load rated for local building code requirements, and when specified with laminated impact glass, it becomes a legitimate opening-protection product. That’s the configuration we recommend for any opening that faces the prevailing storm track.

Security & Hardware - The hardware on an awning window matters because the sash hangs its entire weight from the top hinge. The VLX 80 uses stainless steel friction hinges and a locking mechanism that engages at multiple points along the sill. Even partially open, the geometry makes it tough to force from outside. Fully closed and locked, it’s a serious barrier.

Color & Glass Options

The VLX 80 comes in six finishes, and the right choice depends on what your Palmetto Bay home already says about itself. Premium Black is the strongest seller for modern and transitional exteriors - it creates a crisp frame line against white stucco or light-colored siding and hides coastal grime better than white. Pure White works on traditional Florida ranches and any home where the trim is already white; it blends rather than contrasts. Anodized Silver has a raw, architectural look that suits industrial-modern and true mid-century designs.

Bronze reads warm and grounded, a natural pair for darker roof lines, bronze hardware, or homes with wood accents. Champagne is the quiet luxury option - lighter than bronze, warmer than silver, it bridges contemporary and traditional without shouting. Teak Wood is a wood-grain finish on aluminum, which gives you the warmth of wood appearance with none of the Palmetto Bay rot, termite, or repainting problems.

On the glass side: Clear is straightforward and bright. Frosted works in bathrooms or anywhere you want light without sightlines. Low-E is the energy play - we recommend it on every sun-facing opening in Palmetto Bay. Tempered provides safety-glass shatter resistance for code-required locations. Laminated is the impact option that also cuts sound. Mix and match per opening; you don’t need the same spec everywhere.

Installation by TruePane Windows & Doors in Palmetto Bay

Windows don’t leak because the glass fails. They leak because the installation was rushed. That’s the honest truth after years of replacing botched window jobs across Palmetto Bay, and it’s why we treat installation as the most important part of the product. The VLX 80 is an excellent window. Installed wrong, it’s drafts, condensation, and a voided ViewLux warranty. Installed right, it’s a 20-plus-year window.

We start every job with a pre-install inspection. That means checking the rough opening for rot, measuring for square, and confirming the substrate can hold a properly anchored aluminum frame. In Palmetto Bay, where older CBS construction leaves rough openings that are rarely perfectly square, we shim and adjust so the window sits level, plumb, and square before anything gets fastened. That step alone prevents binding sashes and uneven seal compression later.

Then we set the window per AAMA 2400/2410 installation standards. Perimeter gaps get AAMA 812 low-expansion foam on all joints - it seals without bowing the frame. Flashing and sill treatment follow, with the sill pitched so water sheds outward. Once the window is set and trimmed, we run a final water test and inspect every joint, fastener, and seal. The site leaves clean. The window leaves ready for the next Palmetto Bay storm season.

Code compliance matters here. Miami-Dade County’s building code influence extends into Palmetto Bay, and impact requirements are not optional on windward openings. We pull permits when required and we don’t cut corners on the paperwork. Call (386) 200-9224 to discuss your specific openings.

Frequently Asked Questions - VLX 80 Awning Window

Get a Quote - VLX 80 Awning Window in Palmetto Bay

If the VLX 80 sounds like the right window for your Palmetto Bay home, the next step is a free on-site measurement. We’ll bring a sample, check your openings, and give you a written line-item quote with no change orders down the road. Call TruePane Windows & Doors at (386) 200-9224 to schedule yours.

Written by the team at TruePane Windows & Doors, your local authorized ViewLux installation partner in Palmetto Bay, FL.