Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterTherma-Tru Roof Replacement & Installation in Palmetto Bay: What to Know First
Therma-Tru roof replacement and installation in Palmetto Bay typically runs between $9,800 and $22,400 depending on the roof system, insulation package, and whether we’re matching an existing Therma-Tru entry system’s trim lines. We’re an independent Therma-Tru service provider, not a factory-authorized dealer, which means we quote the work honestly without pushing one brand’s upsell. Most Therma-Tru roof and entry system replacements in this part of Miami-Dade take two to four working days once materials land. If you’re reading this because a Therma-Tru door or entry system has failed around the roofline, call (386) 200-9224 and we’ll put a live person on the line who can tell you whether it’s a repair or a replacement before we ever schedule a visit.
How Therma-Tru Products Fail - and How We Fix Them
Therma-Tru builds a solid door, but South Florida’s salt air and summer rain expose weaknesses that a spec sheet never mentions. Here’s what we see on Palmetto Bay homes, street by street.
- Fiber-Classic and Smooth-Star slab splitting at the stile edges. These are Therma-Tru’s workhorse fiberglass lines, and when the factory weatherstrip channel gets nicked during a rough roof replacement, water creeps in and delaminates the stile over two or three wet seasons. We pull the slab, mill a clean edge, and reset it with new weatherstrip rather than condemning the door.
- Pulse and Classic-Craft entry systems leaking at the head jamb after reroofing. A roofer tears off the old drip edge, and suddenly the Therma-Tru head flashing is exposed. If the new roof doesn’t lap the flashing correctly, the first August storm pushes water straight into the rough opening. We refit the flashing to the new roof plane and seal it with a polyurethane that holds through hurricane season.
- Benchmark patio doors binding at the top roller after roof replacement. Palmetto Bay’s slab homes settle, and a heavier roof - especially concrete tile - shifts the header just enough to pinch the top track. Therma-Tru’s Benchmark rollers are adjustable, but most homeowners never touch them until the door won’t close. We relevel the panel, set the roller height, and it glides again.
- Door slabs bowing from Palmetto Bay’s direct afternoon sun. A dark Therma-Tru slab on a west-facing entry off Old Cutler Road will absorb enough heat to bow a quarter inch. It’s a climate issue, not a manufacturing defect. We install a heat-reflective storm door or remount the slab with a stiffer hinge package - whichever the house needs.
- Warped oak thresholds under Therma-Tru door bottoms. Therma-Tru ships composite thresholds on most lines, but older installations in Palmetto Bay still have oak. Standing water from a roof valley that drains onto the entryway rots it in two years. We swap in a rot-proof composite threshold and adjust the door sweep so nothing wicks under the slab.
Our Therma-Tru Roof Replacement & Installation Process
Every Therma-Tru job we run follows the same sequence, whether it’s a single entry door under a new roof or a full entry system with sidelights. No shortcuts, no surprises.
- 1
Call and conversation. You call (386) 200-9224. A live person answers - not a voicemail tree. We ask what you’re seeing, what the roof contractor said, and whether water has entered the house. That tells us whether to bring repair tools or replacement parts.
- 2
On-site inspection. We measure the rough opening twice, check the header level, and look at how the new roofline sheds water onto the entryway. Dale Kessler reads a rough opening the way some people read a blueprint - nothing goes in until the frame is plumb, sealed, and impact-rated for what comes off Biscayne Bay in August.
- 3
Written line-item quote. We put OEM Therma-Tru parts and quality aftermarket options side by side on paper. You see exactly what each costs, what the warranty covers, and what we recommend for a Palmetto Bay home. You decide. We don’t upsell.
- 4
Removal and prep. We remove the old slab or system, inspect the jamb and sill for rot or termite damage, and repair any compromised framing before the new Therma-Tru unit goes in. This is where most installers cut corners - we don’t.
- 5
Installation and sealing. We set the new unit, shim it true, fasten it, and seal every gap with backer rod and high-grade polyurethane. Flashing laps under the new roof plane so water sheds away, not in.
- 6
Test, register, and promise. We open and close the door twenty times, run water over the threshold, and check the seal with a flashlight from inside. Both warranty layers get registered in writing before the truck leaves the driveway. The Done Right Promise applies from the minute we pull away.
What Therma-Tru Roof Replacement & Installation Costs in Palmetto Bay
Straight numbers, since that’s what you actually want to know. Here’s what we see across Palmetto Bay and the wider Palmetto Bay market for Therma-Tru work tied to roof replacement and installation.
- Entry door slab only (Fiber-Classic or Smooth-Star): $1,400 - $2,800 installed
- Full Therma-Tru entry system with one sidelight: $4,200 - $7,600 installed
- Classic-Craft or Pulse entry system with two sidelights and transom: $7,800 - $14,500 installed
- Benchmark patio door replacement (sliding, impact-rated): $3,900 - $8,200 installed
- Threshold and weatherstrip rebuild after reroofing: $380 - $950
What moves the price: whether the rough opening needs reframing after the roof work, impact-zone compliance requirements, leaded glass or custom finishes, and whether we’re repairing or replacing. We quote fixed pricing with no change orders. Call (386) 200-9224 for a free estimate - we’ll put real numbers in your hand, not a range pulled from a national website.
Why Palmetto Bay Homeowners Call TruePane Windows & Doors for Therma-Tru Work
TruePane Windows & Doors has served this part of Miami-Dade since 2008 through a heritage of craft and community commitment, and Dale Kessler founded this company in 2008 because he was tired of watching out-of-true installs and voided warranties cost homeowners real money. Every Therma-Tru job we run carries The Keystone Standard: both warranty layers registered in writing, durations stated, before our truck leaves your driveway. If something’s not right within 90 days, we make it right - no paperwork, no arguing. We hire local, train apprentices into journeymen, and answer the phone with a live person 24 hours a day, seven days a week. And because we’re an authorized installer for more than a dozen lines - PGT, CGI, CWS, ES Windows among them - we’ll tell you honestly when a Therma-Tru parts delay makes a comparable PGT or CGI unit the smarter buy. A square deal means showing you the alternatives side by side.
FAQs
A Therma-Tru entry door slab replacement in Palmetto Bay runs $1,400 to $2,800 installed, while a full entry system with sidelights and transom runs $7,800 to $14,500 depending on size, glass package, and impact requirements. The roof work itself is usually a separate contractor’s scope, but the door and entry system replacement around it is ours. Call (386) 200-9224 for an exact quote - estimates are free and we’ll put every line item on paper.
No, roof replacement itself does not void a Therma-Tru warranty, but improper flashing or a roofer who yanks the old drip edge and damages the door’s head jamb can. What we tell every Palmetto Bay homeowner: have the door inspected after the roof goes on and before the next heavy rain. We catch flashing and seal problems early, and if something needs refitting, we do it before water gets into the rough opening.
Yes, in many cases we can repair a Therma-Tru slab, threshold, or weatherstrip rather than replace the whole entry system - and we’ll tell you straight if repair is throwing good money after bad. A split stile, a warped threshold, a binding Benchmark patio roller: those are repairs. A slab that’s delaminated through the fiberglass from years of water intrusion: that’s a replacement. We quote both and let you decide. Call (386) 200-9224 and we’ll talk through what you’re seeing.
Most Therma-Tru entry door and system replacements in Palmetto Bay take two to four working days once parts are in hand, with most jobs completed in a single visit. Fiberglass slabs and standard entry systems are usually in stock at our distributors; custom glass, leaded inserts, and Classic-Craft configurations add lead time. We’ll give you a real date when we quote the job, and we’ll be there when we say.
Yes - this is The Keystone Standard at TruePane: both manufacturer warranty layers get registered in writing, with durations stated, before our truck leaves your driveway. No homework for you, no fine print to chase later. If something goes wrong inside the warranty window, we handle the claim with the manufacturer and you handle nothing but the deadbolt.
Written by Dale Kessler, Owner, TruePane Windows & Doors at TruePane Windows & Doors, serving Palmetto Bay and nearby areas.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.