Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterMr-Glass Sliding Glass & Patio Doors in Palmetto Bay: What to Know First
We’re an independent Mr-Glass service provider, not a franchise line, and we fix Mr-Glass sliding glass and patio doors throughout Palmetto Bay on a schedule that respects the door’s age and the salt air it lives in. Most roller, track, and lock work is a single-visit job in our trucks because we keep the common Mr-Glass wear parts stocked. Pricing is straight: a Palmetto Bay Mr-Glass patio door repair typically runs $180 to $450 depending on what’s worn, and we hand you the number before we touch the first screw.
This page is for the homeowner who’s been living with a Mr-Glass door that scrapes, sticks, or lets the afternoon heat bleed through, and who wants a straight answer on whether it’s worth fixing. If that’s you, call us at (386) 200-9224 and a live person answers.
How Mr-Glass Products Fail — and How We Fix Them
Mr-Glass doors that fail in Palmetto Bay almost always fail the same way: the track, the rollers, or the weatherstripping gives out under load and humidity before the glass ever does. Here’s what we see when we get called out, and what we actually do about it.
- Hard-sliding doors on the Mr-Glass 2000 series. This is the most common call in Palmetto Bay. The original steel rollers corrode in the salt air and the bearing seals let go. The door still slides, but it slides like it’s full of sand. We pull the panel, replace the rollers with stainless aftermarket sets rated for coastal use, clean the track, and the door moves with one hand again. The glass is almost never the problem here.
- Handles and locks that snap off or stop throwing. On several Mr-Glass series we do this repair on doors where the internal lock mechanism is pot-metal and simply wears through after ten or twelve years of daily use. We replace with either OEM hardware when it’s still available or a machined aftermarket component that won’t strip. Two-finger locking after we’re done, not a wrestling match.
- Water wicked under the fixed panel after a hard Palmetto Bay rain. This one gets misdiagnosed all the time as a drainage problem. It’s often the sill butyl seal under the fixed panel drying out over a decade of direct afternoon sun. We pull the panel, clean the sill, run fresh seal, and re-bed the frame. Done in a day.
- Impact Mr-Glass panels with scratched or stress-cracked glass. Some homeowners assume a scratched impact unit is trash. It isn’t. The laminated glass in the impact panel can generally be replaced in the existing frame if the frame is sound. We spec replacement glass to the original design pressure for the opening, which matters a lot when the building department measures it after a storm.
- Track corrosion where the aluminum meets the salt. Palmetto Bay sits close enough to Biscayne Bay that unpainted aluminum tracks bloom with white corrosion after a few seasons. We wire-brush the track bed, neutralize the oxidation, and in bad cases install a track cap that protects the rail from further salt attack. It’s not a polish job. It’s preventing a full track replacement down the road.
Our Mr-Glass Sliding Glass & Patio Doors Process
We keep the process simple because a door that isn’t sliding right is enough of a headache without a six-step show. Here’s how a Mr-Glass job runs with us.
- 1
Call and describe the symptom. You talk to a live person, not a voicemail tree. Tell us the door sticks on the left, leaks at the fixed panel, or the handle flops loose. We schedule the visit.
- 2
We inspect the door and the opening. Our tech checks the track, the rollers, the frame alignment, and the seal line. We look at the whole opening, not just the part that’s complaining.
- 3
We give you a price on paper. No “we’ll see once we’re in there.” We quote the repair before work starts, and the number doesn’t move unless we find something structural and you approve the change.
- 4
Parts: OEM when it’s the right call, aftermarket when it’s better. On warranty-sensitive hardware we use Mr-Glass OEM. On wear parts like rollers and seals, we often recommend stainless or marine-grade aftermarket parts that outlast the originals in Palmetto Bay’s salt air. We’ll tell you which is which and why.
- 5
Repair, reset, and test. We re-install the panel, set the track, adjust the latching, and run the door through its full travel ten times. If it binds, we’re not done.
- 6
Cleanup and a straight guarantee. We leave the track and glass clean, the hardware tested, and the work covered by our Done Right Promise. If it isn’t right, we make it right. No argument.
What Mr-Glass Sliding Glass & Patio Doors Costs in Palmetto Bay
Every door is different, but the common jobs have pretty predictable numbers. Roller replacement on a Mr-Glass sliding door typically runs $180 to $320. Lock and handle replacement sits between $140 and $280. A fixed-panel re-seal runs $250 to $450 depending on panel size and access. If the track needs caps or a full replacement, you’re looking at $400 and up. Full glass replacement in an impact frame generally starts around $600 and climbs with the opening size and design pressure rating.
What moves the price the most is whether the door is a two-panel or three-panel, whether the original hardware is still made, and how much corrosion has taken hold. We give Palmetto Bay homeowners a written quote before any work starts, and estimates are always free. Call (386) 200-9224 and we’ll come see the door in person.
Why Palmetto Bay Homeowners Call TruePane Windows & Doors for Mr-Glass Work
We don’t run a franchise playbook. Dale Kessler has been working windows and doors in this part of Miami-Dade for going on two decades, and he grew up near Old Cutler Road where the older homes taught him early that South Florida weather has no patience for shoddy work. Our techs are background-checked, uniformed, and they know a Mr-Glass door the way a glazier should.
Every Mr-Glass repair we do is covered by the Done Right Promise and The Keystone Standard: both warranty layers registered in writing, durations stated, before the truck leaves the driveway. And if your Mr-Glass door turns out to be beyond saving, we’re also an authorized installer for PGT, CGI, CWS, and ES Windows, so the replacement conversation never means calling three more companies. One call, one straight answer, one number that doesn’t change. That’s the deal.
FAQs
We work as an independent Mr-Glass service provider, which means we don’t administer the Mr-Glass manufacturer warranty directly, but we do register both warranty layers in writing on any parts we source and install through our own Keystone Standard. If you have an active Mr-Glass warranty, bring us the paperwork and we’ll work with the manufacturer on your behalf where it applies.
We source Mr-Glass OEM parts for lock sets, latch hardware, and anything warranty-sensitive, and we keep common wear items like rollers, seals, and track components stocked in our trucks. On rollers and weatherstripping specifically, we often recommend marine-grade aftermarket parts that handle Palmetto Bay’s salt air better than the originals did. You don’t have to chase parts yourself; that’s our job.
Repair first. Most sticking or scraping Mr-Glass doors in Palmetto Bay need roller replacement and track cleaning, which typically runs under $350. The glass and frame usually have another ten or fifteen years in them. We’ll tell you honestly if the frame or track is too far gone to make repair worthwhile, and we’ll quote a replacement with PGT, CGI, CWS, or ES Windows if that’s the case.
We schedule most Mr-Glass repair calls within a few days, and because we stock the common parts, most sliding door repairs are a single visit. A live person answers when you call, not a recording, so you’ll get a straight answer on timing the first time you reach us.
No. We quote the job on paper before we start, and that number doesn’t move unless we uncover something structural, you approve it in writing, and we all understand why. That’s a square deal and it’s the only way we work.
Ready to get your Mr-Glass door sliding right again? Call TruePane Windows & Doors at (386) 200-9224 for a free estimate, or to talk through what you’re seeing. A live person answers, day or night.
Written by Dale Kessler, Owner, TruePane Windows & Doors at TruePane Windows & Doors, serving Palmetto Bay and nearby areas.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.