Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Mr-Glass Window Replacement: The Palmetto Bay Owner’s Guide
If your Mr-Glass window has a failed insulated unit, a rotted frame, or a sash that won’t stay up, we carry and install Mr-Glass-compatible replacement windows throughout Palmetto Bay. A full window replacement on a standard Mr-Glass single-hung or casement runs $350 to $900 installed, including the new unit, weatherproofing, and disposal of the old frame. Most Palmetto Bay Mr-Glass replacements are completed in one visit, and we keep the most common glass packs and hardware on the truck so you’re not waiting on a second appointment.
The way most homeowners here discover their Mr-Glass window is failing is simple: they walk past the slider in November and realize the glass has been fogged since hurricane season. Mr-Glass products, especially the older series installed in the late 1990s and early 2000s in neighborhoods like Old Cutler Estates and Coral Reef, were solid mid-range windows. What fails first in our climate is the edge seal on the insulated glass unit. Palmetto Bay’s humidity and salt air find those seals within twelve to fifteen years, and once the gas escapes, the unit is finished. There’s no field repair for that.
Which Mr-Glass Models This Applies To
We work with the Mr-Glass series most commonly found in Palmetto Bay homes: the 40 and 50 series single-hung, the casement and awning lines from the same era, and the horizontal sliders that went into a lot of the ranch homes along Old Cutler Road. The quickest way to identify your model is the label on the top edge of the sash or the bottom rail. Open the window and look for an etched or printed code that includes the series number and the glass dimensions. If the label is gone, we measure the window ourselves, twice, before ordering anything.
The important gotcha with Mr-Glass is that the frame depth can differ within the same model line depending on whether the original install was a new-construction or retrofit application. A 50-series single-hung in a concrete-block Palmetto Bay home is not always a drop-in match for the same series ordered for a wood-frame addition. That difference changes the thickness of the replacement unit you need. We do not guess on this. When Dale Kessler reads a rough opening, the frame gets checked for plumb and square with a level, not a tape measure and a prayer. For Mr-Glass specifically, we recommend OEM glass packs when the frame is still sound, because the spacer profile matches the original. Aftermarket equivalents from Cardinal or Guardian work, but the sightline can look slightly different, and you’ll notice it every time you look out the window.
Signs Your Mr-Glass Window Replacement Is Failing
- Fog or haze between the panes that won’t wipe off. This is the big one. The edge seal has failed, moisture is inside the unit, and the low-E coating is starting to stain. It will not go away on its own. The glass has to be replaced.
- The sash drops when you let go of the handle. The spiral balance or block-and-tackle cord has given out. On Mr-Glass single-hungs, the balance is sized to the sash weight, and if you replace it with the wrong spring weight, the window either slams shut or fights you to stay open. We match that deliberately.
- Condensation on the inside of the glass in the morning, every morning. That is argon gas escaped and humid Palmetto Bay air taking its place. The window still functions, but the seal is gone and the energy efficiency went with it.
- You can feel heat radiating through the glass at noon. The low-E coating has degraded or the unit was never low-E to begin with. South-facing windows on the Old Cutler corridor take direct sun from mid-morning to late afternoon. Once the coating fails, your HVAC is doing the job the window used to do.
- The sash binds when you try to open it, or won’t lock when you close it. Frame movement. Palmetto Bay sits on limestone with a high water table, and older homes settle at different rates. A Mr-Glass frame that has racked even slightly will bind at the meeting rail. Sometimes a hardware adjustment cures it; sometimes the frame has to come out. We tell you which one before we touch a screwdriver.
Replacement Cost & What’s Included
Installed Mr-Glass window replacement in Palmetto Bay runs $350 to $900 per window, with the final number moving on three things: the window size, whether the frame is salvageable or needs a full-frame replacement, and the glass package. A small single-hung with standard clear glass falls at the bottom end. A wide casement or a slider with impact-rated or tinted glass sits at the top. Here’s the honest breakdown:
- Glass-pack-only replacement (frame kept): $225 to $450 installed. We remove the old sash, reglaze the unit, reinstall, and rebalance.
- Full-frame replacement for a standard-size single or double-hung: $500 to $700 installed. The old frame comes out to the rough opening, we flash it properly, set the new window, and trim it out.
- Full-frame replacement with impact-rated or high-efficiency glass: $650 to $900 installed. This is what we recommend for any opening that faces Biscayne Bay or takes the brunt of the afternoon storm track.
Every quote is line-itemed on paper, and the price on the quote is the price on the bill. No surprise line items, no change orders. Your manufacturer warranty gets registered in writing before our truck leaves your Palmetto Bay driveway, and your workmanship carries our Done Right Promise. If it is not right, we make it right.
DIY or Call Us?
You can check the label, take photos of the fogged pane, and measure the visible glass. That helps us bring the right parts on the first trip. What you should not do is pull a Mr-Glass sash out of a second-story window in July. The sash on a 50-series double-hung weighs enough, with the glass, to wreck a shoulder if the balance releases unexpectedly. And if the old frame is not flashed correctly when you set the new one, you’re not saving money. You’re creating a leak.
When it comes to Mr-Glass replacement work, TruePane Windows & Doors is an independent service provider, not affiliated with Mr-Glass. We carry the compatible parts because these windows are everywhere in Palmetto Bay, and we know what fails and when. If the pane is not true in the opening when we set it, the job is not done. If you’d like a free estimate, or you just want to ask whether your fogged unit is worth replacing or if you can live with it another year, call (386) 200-9224. A live person answers.
FAQs
Twelve to fifteen years for the insulated glass unit is the honest answer in our climate. The frames can go longer if they were flashed properly at the original install, but the seals on the glass fail first in Palmetto Bay’s humidity and salt air. Once the glass fogs or the coating stains, the window is done until the unit is replaced. Call (386) 200-9224 and we’ll tell you exactly where your window is in that lifespan.
No. Once the edge seal fails and moisture is inside the unit, there is no field repair that restores the window. Defogging services just hide the symptom for a season. The real fix is replacing the insulated glass unit, and that’s a straightforward job for us. Estimates are free.
Most single-window replacements in Palmetto Bay are done in a single visit of one to three hours. Glass-pack replacements are faster; full-frame replacements take longer when there’s drywall or stucco work to patch around the opening. We’ll give you a realistic window of time when we schedule.
We stock Mr-Glass-compatible balances, hardware, and glass packs for the 40 and 50 series on our trucks, along with parts for PGT, CGI, and CWS. Odd sizes and impact-rated units may need a few days to order from the manufacturer. We match the part to your frame before anything gets ordered. Call (386) 200-9224 for an exact match and a free estimate.
Written by Dale Kessler, Owner, TruePane Windows & Doors at TruePane Windows & Doors, serving Palmetto Bay and nearby areas.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.



Before
After
Before
After
Before
After