Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterCGI Roof Replacement & Installation in Palmetto Bay: What to Know First
CGI roof replacement and installation in Palmetto Bay runs between $900 and $2,800 for most residential jobs, depending on whether we’re replacing a single impact-rated roof panel, a full roof system, or addressing water intrusion around the glazing. We complete most CGI roof work in one to two visits, and we’ll give you a written line-item quote before any material gets ordered. If you own a CGI roof product and it’s leaking, fogging, or showing age, call (386) 200-9224 and a live person will answer, day or night.
This page is for homeowners who already have CGI roof systems, roof windows, or skylights and want them replaced or installed by a crew that knows the product line. We’re an independent CGI service provider, which means we work on your behalf, not the manufacturer’s.
How CGI Products Fail - and How We Fix Them
CGI builds a solid impact-rated product, but Palmetto Bay’s salt air, sun, and hurricane-season rain find every weakness. Here’s what we see on CGI roof systems in this part of Miami-Dade:
- CGI Sentinel Roof Glazing gasket compression failure. The rubber gaskets around CGI roof glazing panels compress over time, especially on west-facing roofs that bake all afternoon. When the gasket loses its rebound, water creeps under the frame and stains the ceiling below. We pull the panel, replace the gasket with an OEM-equivalent compression seal, and re-bed the frame before it goes back in.
- CGI 9500 Series roof hatch thermal bowing. These aluminum hatches are built to take a hit, but the extrusion can bow slightly after years of thermal cycling. The hatch then sits proud on one corner, letting wind-driven rain through the seam. We shim and re-square the opening, re-align the hatch, and replace the weatherstripping so it seats flush.
- Condensation between CGI roof panel glass lites. A failed seal between the glass layers is the number-one call we get from CGI owners in Palmetto Bay. The unit itself has not failed structurally, but the insulating gas is gone. We order a replacement glazing unit matched to the original, swap it, and register both warranty layers in writing before we leave the driveway.
- CGI roof window flashing corrosion near the coast. Homes east of Old Cutler Road are close enough to Biscayne Bay that aluminum flashing can pit and corrode faster than the same parts would inland. If the flashing around a CGI roof window has oxidized through, we cut it out, replace it with marine-grade material, and seal the transition properly.
- Impact glass micro-pitting from Palmetto Bay landscaping debris. After a storm season or two, CGI roof panels on homes with mature trees can show fine pitting on the exterior glass surface. It rarely compromises impact rating, but it scatters light and looks worn. We polish or, if it’s deep enough, replace the pane with a new CGI-rated lite.
Our CGI Roof Replacement & Installation Process
- 1
Call and talk to a person. You call (386) 200-9224. A live person answers, asks what you’re seeing, and helps determine whether this is a service call or an estimate.
- 2
On-site inspection. Our tech measures the opening twice, checks the existing flashing, the deck condition, and the interior ceiling for water damage. Nothing gets ordered until we know what we’re dealing with.
- 3
Written quote, side by side. We put our recommendations on paper, including OEM and quality aftermarket options if both make sense for your roof. You see exactly what you’re buying and what it costs.
- 4
Parts and scheduling. We order the CGI roof components, confirm lead time, and give you a date. We’ll be there when we say.
- 5
Replacement and installation. The old unit comes out, the opening gets cleaned, flashed, and sealed, then the new product goes in. If the frame is not plumb, we stop and fix that first.
- 6
Test and cleanup. We water-test the installation, walk you through what we did, and register both warranty layers in writing before the truck leaves the driveway.
What CGI Roof Replacement & Installation Costs in Palmetto Bay
Here are honest ranges for what CGI roof work costs in this market:
- CGI roof window replacement (one unit, standard size): $900-$1,600
- CGI roof glazing panel replacement (single panel): $1,400-$2,300
- CGI roof hatch replacement: $1,800-$2,800
- Flashing repair and re-seal around existing CGI roof unit: $450-$850
- Full CGI roof system replacement (multiple panels, custom sizing): $4,500-$12,000
What moves the price: the size of the opening, whether the deck needs reinforcement, access (a second-story roof with a steep pitch costs more to work safely), and whether we’re matching an existing CGI product that’s been discontinued. The quote you get is the price you pay. No change orders, no surprise line items. Call (386) 200-9224 for an exact number. Estimates are free.
Why Palmetto Bay Homeowners Call TruePane Windows & Doors for CGI Work
We have been doing this long enough to know that a roof replacement is not the place to gamble. If the pane is not true, the job is not done, and that founding rule applies just as much to a CGI roof panel as it does to a storefront window. Every CGI job we do carries our Done Right Promise: if it is not done right, we make it right, with no paperwork fights and no arguing. Both manufacturer warranty layers get registered in writing, with durations stated, before the truck leaves the driveway.
We work on CGI and also service PGT, CWS, ES Windows, and ECO Window Systems, so if your home has mixed brands, you’re not calling three different contractors. Dale Kessler, who owns TruePane, grew up near Old Cutler Road and has worked windows and doors in this part of Miami-Dade for going on two decades. He knows what Palmetto Bay humidity and storm season do to a roof installation. We hire locally, train apprentices into journeymen, and plan to be in town in thirty years. If it is not right in the opening, it will not be right in a hurricane.
FAQs
No, as long as the replacement is done to the manufacturer’s installation specifications and the new unit is registered properly. That’s why we register both warranty layers in writing before we leave. If a previous contractor skipped that step, your warranty may already have a gap, and we can tell you what’s salvageable during the inspection.
Call (386) 200-9224 and we’ll walk through what’s covered before any work starts.
In most cases, yes. CGI has consolidated some lines over the years, and a discontinued model can often be matched with a current production unit of the same size and impact rating. When an exact match is not available, we’ll quote the closest option side by side on paper so you can see the difference in writing. That’s the square deal.
If the issue is a failed gasket, loose flashing, or condensation between the panes, repair is usually the right call and costs less. If the frame is corroded, the glass is cracked, or the unit is more than 15 years old and has already been serviced twice, replacement is the better investment. We’ll tell you straight, and we’ll quote both ways when it makes sense.
Most single-unit CGI roof replacements take one day on site, assuming the parts are in stock or arrive on schedule. Custom-sized roof glazing may take two to three weeks for fabrication. We give you a timeline in writing when we quote, and we’ll be there when we say. Call (386) 200-9224 for a free estimate.
Written by Dale Kessler, Owner, TruePane Windows & Doors at TruePane Windows & Doors, serving Palmetto Bay and nearby areas.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.