Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterFull Frame Replacement in Palmetto Bay, FL
Full frame replacement is the most thorough way to address aging windows in Palmetto Bay homes, involving the complete removal of the existing window unit, including the frame and trim, down to the rough opening. Unlike a pocket installation, which fits a new window into an existing frame, a full frame replacement allows us to inspect the structural integrity of the rough opening, install new flashing, and ensure the new frame is perfectly level and square within your home’s wall structure. At TruePane Windows & Doors, we specialize in our Window Replacement services for homeowners who want to eliminate wood rot, improve energy efficiency, and ensure long-term performance in our humid, storm-prone Florida climate. If you are noticing water intrusion, soft spots around your casing, or windows that have become impossible to operate, call us at (386) 200-9224 to discuss whether a full frame install is the right choice for your property.
We approach every project with the understanding that a window is only as good as its installation. When we remove an old window frame, we aren’t just taking out glass; we are exposing the skeleton of the wall. This allows us to confirm that the substrate is sound and properly sealed against the Palmetto Bay moisture. We serve the area with a commitment to craft, which is why we offer our Done Right Promise on every job. We ensure that both manufacturer warranty layers are registered in writing before our truck leaves your driveway, providing the security that comes with The Keystone Standard. Whether you are looking for impact-resistant glass from brands like PGT or high-efficiency units from CGI, we provide side-by-side quotes on paper so you know exactly what you are paying for. For a broader look at how we approach home comfort, you can review our full Window Replacement in Palmetto Bay services.
When You Need Full Frame Replacement
Not every window project requires a full frame tear-out, but certain conditions make it the only professional solution. We often see these issues in older homes across Palmetto Bay, particularly those built before modern impact codes were strictly enforced, where Historic Window Restoration may be needed. If you see these signs, it is time to have a professional evaluate the structural condition of your openings.
- Evidence of Wood Rot: If the wood surrounding your window frame is soft, crumbly, or shows signs of water damage, a pocket insert will only trap that rot inside your wall. We must remove the frame to treat or replace the damaged substrate.
- Moisture and Leaks: If you are finding standing water on the interior sill or damp drywall after a summer thunderstorm, the existing flashing system has likely failed. A full frame replacement allows us to install new, code-compliant flashing and water-resistive barriers.
- Out-of-Square Openings: Over decades, homes settle. If your current windows are binding or have gaps where the sash meets the frame, the original opening may have shifted. We can re-square the rough opening during a full frame install to ensure the new window operates smoothly.
- Desire for Maximum Glass Area: Some older window frames are bulky. By removing the old frame entirely, we can sometimes optimize the rough opening to accommodate a more modern, slimmer frame profile, giving you a cleaner look and more natural light.
- Upgrading to Impact Glass: If you are switching from non-impact to heavy-duty hurricane impact windows, the weight and mounting requirements often necessitate a full frame replacement to ensure the structure can handle the load and meets current local building codes.
Our Full Frame Replacement Process
We follow a methodical approach to ensure every install meets the standard Dale Kessler established in 2008. We do not rush, and we do not cut corners on preparation. Here is how we handle a full frame replacement for your home.
- Structural Assessment: We arrive at your home and carefully remove the interior and exterior trim to inspect the condition of the rough opening. We identify any hidden rot or structural issues before we ever remove the existing window.
- Removal and Prep: We take out the old window and frame entirely, cleaning the opening down to the studs. This is the stage where we address any water damage we found during the assessment, ensuring the wall structure is solid and dry.
- Flashing and Sealing: We install a new, high-performance flashing system around the rough opening. In Palmetto Bay, proper flashing is the single most important factor in preventing future leaks. We treat the rough opening as a critical barrier against our local humidity.
- Setting the New Frame: We install the new window unit, shimming it until it is perfectly plumb, level, and square. We check the operation of the sashes multiple times to ensure they glide without resistance and lock securely.
- Insulation and Trim: We fill the gap between the new frame and the rough opening with high-quality insulation to eliminate drafts. Finally, we reinstall or replace the interior and exterior trim, finishing the job with professional-grade caulking.
- Warranty Registration: We complete the paperwork for The Keystone Standard, registering both manufacturer warranty layers before we leave. You receive a copy for your records, ensuring you have no paperwork fights if you ever need service.
Full Frame Replacement Pricing in Palmetto Bay
Pricing for a full frame replacement is higher than Insert Window Replacement because of the additional labor, material removal, and the complexity of re-trimming the opening. In the Palmetto Bay market, you should expect to budget more for the precision required to ensure the job is done right. We believe in upfront pricing, so we provide a clear, written estimate after we have measured your openings and discussed your brand preferences-whether that is ES Windows, CWS, or another manufacturer we trust.
| Service Factor | Estimated Cost Impact |
|---|---|
| Standard Full Frame Install | $900 – $1,600 per opening (varies by size and material) |
| Structural Repair/Substrate Replacement | $200 – $500 per opening (dependent on rot severity) |
| Impact Glass Upgrades | 15% – 25% increase over standard non-impact units |
We do not use high-pressure sales tactics. We provide a square deal, which means we measure twice, provide side-by-side quotes for different manufacturer lines, and let you decide what fits your budget and home needs. We also offer a permanent 5% discount for seniors and veterans to help manage costs. To get an accurate figure for your specific home, call (386) 200-9224 to schedule a free estimate.
FAQs - Full Frame Replacement
How much does it cost to replace a full frame window in Palmetto Bay?
A full frame window replacement typically costs between $900 and $1,600 per opening, depending on the window size, the manufacturer, and whether structural repairs are needed to the rough opening. Because every home is different, we provide a written, upfront quote after inspecting your specific windows, ensuring there are no surprise line items on your bill. Call (386) 200-9224 for an exact quote - estimates are free.
Is it better to do a full frame replacement or a pocket insert?
A full frame replacement is superior if your existing frame is rotted, leaking, or if you want to ensure the new window is perfectly level and square within the wall. While a pocket insert is faster and less intrusive, it relies on the integrity of your existing frame; if that frame is compromised, you are just masking the problem. For homes in severe weather zones, Storm Window Replacement may be a better long-term solution. If you are unsure which your home needs, our technicians can assess your current openings and provide an honest recommendation.
How long does a full frame replacement take?
Most full frame replacements are completed in a single visit, though the timeline depends on the number of windows and the condition of the underlying wall structure. We pride ourselves on being punctual and prepared, ensuring we have all the materials on the truck before we arrive so we don’t leave your project hanging. We aim to respect your time by finishing the work cleanly and efficiently.
Do you handle the permitting and code requirements for Palmetto Bay?
Yes, we manage the necessary requirements for your window installation, ensuring all work meets local building codes for hurricane protection and energy efficiency. We are familiar with the specific needs of Palmetto Bay homes, including the strict standards for impact-resistant glazing. We handle the technical side so you don’t have to worry about the regulatory details of your home improvement.
When you are ready to address your windows, remember that the most important part of the job is the installation itself. We stand behind our work with our Done Right Promise and the commitment that if the pane is not true, the job is not done. Our team is local, we are here to stay, and we are ready to help you improve your home’s performance. Call (386) 200-9224 today to speak with a live person about your project.
Written by Dale Kessler, Owner at TruePane Windows & Doors, serving Palmetto Bay.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.